How to configure Internet Wind on Android
Do you have a smartphone or tablet equipped with Android? So to configure the Internet network on your Wind SIM you must first go to the device settings panel, whoseicona dell'ingranaggio you can find it on the home screen or in the drawer.
If you have a mobile device with one of the latest versions of Android, select the items in the settings Wireless & Networks> Mobile Network> Access Point Names. At this point you have two alternatives: if the Wind APN is already present, tap on the icon (I) next to it or if it is not present, press the icon ⋮ and choose the item New APN.
If the Android version is older, instead, in the device settings panel, tap on the items More> Cellular networks (Or Other networks> Mobile networks). Next, select the item Access point names (o profiles), tap the button + which is located at the top right.
If the button is not present on your device +pigia sull'icona (...) in alto a destra and selects the voice New APN from the menu that opens. Now, fill out the form that is proposed to you with the data you find illustrated below.
- Your name - INTERNET WIND
- APN - internet.com
- proxy -
- Port -
- Username -
- Password -
- Server & Hosting -
- MMSC -
- MMS proxy -
- MMS port -
- MMCC - 222
- MNC - 88
- Authentication type -
- Type APN - default, supl
- APN protocol - IPv4
- APN roaming protocol - IPv4
- Enable / disable APN - APN activated
- Connection -
- MVNO type -
- MVNO value -
After entering (or updating) all the data in the form, tap on the icon ✓ at the top to confirm the data entered. If you don't find the above icon, press the button instead (...) che si trova in alto a destra e seleciona la voce Save from the menu that opens. Then put the check mark next to the item INTERNET WIND and the 3G / LTE connection should work smoothly.
If you have a device compatible with the 4G / LTE network but you can only browse in 3G, go to the menu Settings> Wireless and networks> Mobile network> Preferred network mode. If your device has an older version of Android, go to the menu Settings> More> Cellular networks> Preferred network type (Or Settings> Other networks> Mobile networks> Network mode) of Android.
All you have to do is put the check mark next to the item LTE / 4G or the one named Automatic LTE / 3G / 2G, to allow your device to select the best network mode to apply based on the one available where you are.
As mentioned above, by configuring the APNs appropriately, it is also possible to activate support for MMS. To activate MMS support on your Android smartphone, go to the menu Wireless & Networks> Mobile Network> Access Point Names.
On older versions of Android, however, select the items More> Cellular networks or Other networks> Mobile networks from the menu Settings and create a new APN with the following data.
- Your name - MMS WIND
- APN - mms.com
- proxy -
- Port -
- Username -
- Password -
- Server & Hosting -
- MMSC - mms.windtre.com
- MMS proxy - mssproxy.windtre.com
- MMS port - 8080
- MMCC - 222
- MNC - 88
- Authentication type -
- Type APN - mms
- APN protocol - IPv4
- APN roaming protocol - IPv4
- Enable / disable APN - APN activated
- Connection -
- Mobile network virtual operator type -
- Mobile network virtual operator value -
Finally, save the APN as seen above and you should be able to use MMS on your phone.
How to set up Internet Wind on iPhone
I use a iPhone? In this case, configuring the APNs for Internet browsing and MMS will take you no more than a few moments. All you have to do is go to the Settings of iOS (theicona dell'ingranaggio located on the home screen), select the items Cellular> Cellular Data Network from the screen that opens and fill in the form that is proposed to you with the following data.
MOBILE DATA
- APN - internet.com
- Username -
- Password -
LTE CONFIGURATION (OPTIONAL)
- APN -
- Username -
- Password -
MMS
- APN - mms.com
- Username -
- Password -
- MMSC - mms.windtre.com
- MMS proxy - mmsproxy.windtre.com
- Maximum MMS size - 307200
- MMS UA Prof URL -
Now press the button < which is located in the upper left and that's it. The data connection and MMS should work correctly. If the LTE network is not hooked, go to the menu Settings> Cellular> Cellular Data Options of iOS and set to LTE o 4G the option Voice and data. 4G / LTE is only supported by iPhone 5 and later.
If you have one iPad equipped with Cellular support you have to follow the same procedure just seen together for iPhone, the APNs to be used are the same.
How to configure Internet Wind on other smartphones / tablets
Finally, I would like to point out that on the WINDTRE website there is a page that collects the instructions for configuring the Internet access points on all the main models of smartphones and tablets.
Therefore, if you want to get more details on how to configure Internet on your smartphone or tablet, you can consult this dedicated page on the WINDTRE website. If, on the other hand, you want to configure MMS, you can read the instructions provided by WINDTRE at this link.
If despite the instructions in this guide you are unable to configure the Internet on your mobile device, try to contact the operator following the instructions you find in this tutorial dedicated to the subject and seek direct support from the company.
How to configure Internet Wind
